Absolute Optex AX100TF/AX200TF Photoelectric Sensor Pair

Optex AX100TF/AX200TF Photoelectric Active Infrared Sensor Pair

The AX-100TF long range photoelectric detectors with selectable beam frequencies can be used to sidestep cross-talk that occurs when using more than one photobeams over really long distances or from using other beam stacking applications.

On top of that, the AX-TF Series employs multiple beam technology and utilizes an AMD circuit that requires all beams to be interrupted simultaneously before an alarm is generated. With this technology implemented, the chances of a false alarm being called from tiny animals (eg. birds) is very minimal. Perfect for indoor or outdoor applications.

Optex AX100TF/AX200TF Photoelectric Sensors Specifications

AX-100TF

• Detection Method: Infrared beam interruption detection
• Maximum Detection Range: 100 ft
• Maximum Arrival Range: 1000 ft
• Interruption Period: Selectable between 50,100,250 and 500m sec
• Selectable Beam Frequency: 4 Channel
• Power Supply: 10.5 – 28V DC
• Current Consumption (Transmitter & Receiver): 44mA Max
• Alarm Period: 2sec. (±1) nominal
• Alarm Output: N. C./N. O. 28V DC, 0.2A (max.)
• D. Q. Output: N. C. 28V DC, 0.2A (max.)
• Tamper Switch: Opens when cover is removed at 28V DC, 0.2A max.
• Operating Temperature: -35°C to +60°C (-31°F to +140°F) Use the optional heating unit (HU-3) in conditions of -25°C (-13°F) or below
• Operating Humidity: 95% max
• Alignment Angle: ± 90° Horizontal, ± 5° Vertical
• Wall and pole mounting
• Weight (transmitter + receiver): 700g (24.7oz.)
• Housing Protection (EN 00529): IP65

AX-200TF

• Detection Method: Infrared beam interruption detection
• Maximum Detection Range: 200 ft
• Maximum Arrival Range: 2000 ft
• Interruption Period: Selectable between 50,100,250 and 500m sec
• Selectable Beam Frequency: 4 Channel
• Power Supply: 10.5 – 28V DC
• Current Consumption (Transmitter & Receiver): 48mA Max
• Alarm Period: 2sec. (±1) nominal
• Alarm Output: N. C./N. O. 28V DC, 0.2A (max.)
• D. Q. Output: N. C. 28V DC, 0.2A (max.)
• Tamper Switch: Opens when cover is removed at 28V DC, 0.2A max.
• Operating Temperature: -35°C to +60°C (-31°F to +140°F) Use the optional heating unit (HU-3) in conditions of -25°C (-13°F) or below
• Operating Humidity: 95% max
• Alignment Angle: ± 90° Horizontal, ± 5° Vertical
• Wall and pole mounting
• Weight (transmitter + receiver): 700g (24.7oz.)
• Housing Protection (EN 00529): IP65

Optex AX100TF/AX200TF Photoelectric Sensors Includes

• 1 x Photo beam Transmitter
• 1 x Photo beam Receiver

Optex AX100TF/AX200TF Photoelectric Sensors Support

• Optex Photo beam Manual
• Optex Photo beam Flyer